Thursday, January 22, 2015


unke liye jinhe lagta he ki sarkar kuch karti nahi...
बन्दे में दम है...! जब गुजरात के CM थे तो भारत के PM से
भी अधिक प्रभाव रखते थे.. अब PM है तो SAARC के
सभी नेताओं से भी अधिक प्रभाव रखते है ।
# सेंसेक्स 20000 से 29000 पर, Nifty 5000 से 8500 पर, #
GDP लगभग 4 से 5.7, टमाटर 80 से 20 पर, # पेट्रोल 73 से 60
पर, सोना 28000 से 25900, # स्टैण्डर्ड_एंड_पूवर्स
की रेटिंग नेगेटिव से पॉजिटिव हुई, चीन अगले
पांच साल में 5 लाख करोड़ निवेश करेगा, # जापान 38 खरब $ निवेश
करेगा अगले 3 साल में, अमेरिका और #
ऑस्ट्रेलिया भी निवेश करेगा भारत में !! लेकिन कुछ लोगों के
लिए ये # अच्छे दिन नहीं हैं !! फिर भी कुछ
लोगो को लगता है की अच्छे दिन का मतलब #
मोदी जी आयेंगे उनका # काम करने या #
झाड़ू लगायेंगे उनके यहाँ [: वाह
मोदी जी वाह!!!!
मोदी जी के 4 नये और बडे फरमान........ . .
1- कोई भी विदेशी दौरे पर
पत्रकारों की भीड़ को साथ लेकर
नहीं जाएगा...... लग गई
वाट ,पत्रकारों की मौज खत्म 2-
सरकारी कर्मचारी,बाबू, उच्च
अधिकारी, अफसर,IAS, IPS,
मंत्री,संतरी इन सबको अब
अपनी पत्नी और अपने
बच्चों की सम्पति का भी ब्यौरा टैक्स
विभागको देना होगा.. और उनकी जाच टैक्स विभाग
करेगा..अब तो लग गई वाट. 3- सरकारी बड़े
अधिकारियों को विदेश का दौरा करने से पहले PMO को 10 दिन पहले
आवेदन करना पड़ेगा और विदेश दौरे का पूरा ब्यौरा देना पड़ेगा.....क्यूँ
जा रहे हो, क्या करने जा रहे हो..अब तो लग गई वाट. 4- कोई
भी सरकारी मंत्रालय के अफसर 5
सितारा होटल में कॉन्फ्रेस आयोजित
नहीं करेगा...उनको सरकारी भवनों में
ही किया जा सकेगा .. लो लग गई वाट।5
सितारा का खाना भी बन्द कर दिया नरेन्द्र भाई इधर भूटान
गये तो चीन घबराया, ब्रिक्स मे ब्रिक्स बैक
की बात की तो अमेरिका घबराया, जापान के साथ
युद्धाभ्यास किया तो चीन तिलमिलाया उधर अमेरिका से
C-17 global master plane खरीद कर सेना मे
शामिल करने से पाकिस्तान घबराया,वाह वाह... → उधर
चीन जापान को कमजोर करना चहता है. → उधर
अमेरिका चीन को कमजोर करना चाहता है और सब के सब
भारत से निकटता चाहते हैं फ़ुटबाल बना दिया पुरे विश्व को......
मोदी ने.... वाह क्या कूटनीति और क्या विदेश
नीति है....!!! भाई बात को समझो खाली टमाटर
सस्ते होने से अच्छे दिन नही आएंगे आप
की औकात विश्व को पता चलेगी आप का रोब
दुनिया पर चलेगा वो दिन कितना अच्छा होगा जब दुनिया भारत को बडा भाई
मानेगी और आंख उठा कर नही सर झुका कर
बात करेगी क्या खोया हुआ सम्मान पाना अच्छे दिन
नही हे मैं टमाटर तो क्या अपने आत्म सम्मान के लिए
देश के सम्मान के लिए भूखा जान भी दे सकता हूँ
ना फोरवार्ड करने को कह रहा हूँ ना शेअर करने को बस गहराई से
मनन करने का निवेदन कर रहा हूँ । बात दिल को छू जाए और खुद के
भारतीय होने पर गर्व महसूस होने लगे तो ..............
अब महसूस हो रहा है 56" का सीना किसे कहते हैं
मोदी जी को बहुत बहुत धन्यवाद

Monday, January 19, 2015

Install Windows 7/Vista From USB Drive
Requirements:
*USB Flash Drive (Minimum 4GB)
*Windows 7 or Vista installation files.
Follow the below steps to create bootable Windows 7/Vista USB drive using which you can install Windows 7/Vista easily.
1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe location on your system.
2. Open Command Prompt with admin rights. Use any of the below methods to open Command Prompt with admin rights.
*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.
Or
*Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator.
3. You need to know about the USB drive a little bit. Type in the following commands in the command prompt:
First type DISKPART and hit enter to see the below message.
Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.
4. Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.
So below are the commands you need to type and execute one by one:
SELECT DISK 1
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
(Format process may take few seconds)
ASSIGN
EXIT
Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.
5. Next insert your Windows7/Vista DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to know about it).
6. Maximize the minimized Command Prompt in the 4th step.Type the following command now:
D: CD BOOT and hit enter.Where “D” is your DVD drive letter.
CD BOOT and hit enter to see the below message.
7. Type another command given below to update the USB drive with BOOTMGR compatible code.
BOOTSECT.EXE /NT60 H:
Enjoy!!!!!!

Saturday, January 17, 2015

How to Create DNS Server in Windows server 2012

  • Hi guys here i telling you how to Create the DNS Server in Windows server 2012
  • It is so different type of Installation in Windows server 2012.
  • Please Watch this video.
video

Window 2012 Server Installation 
  1. Insert the DVD of Window server 2012 in the DVD Rom.
  2. Make first bootable device of DVD writer.
  3. Then Restart the System 
  • After some time it will ask for time and currency format 

  • Then click Install Now


  • Please Wait Some time now setup is starting



  • Then select the Server Type here:-



  • Please Accept the License Agreement then click next



  • Click on Custom install windows only 



  • Then Select the Unallocated Space then click on new for create partition of hard disk



  • Then Select the Size Then Click on OK



  • Then select the partition and then click on format



  • Then click on OK and then Click Next



  • This windows is Appearing on Screen.



  • Then After the completion this click on Restart Now 



  • Please Wait for some time


  • please wait for Getting Ready  


  • Type the Administrator Password and Reenter Password then Click on Finish  


  • After completion this Server Manager windows appear on Screen




And now All finish the Installation of Windows Server 2012 .

Friday, October 17, 2014

Printer Attachment Issue in Windows 7,windows 8 and 8.1

Unable to set DEFAULT PRINTER? - Let's troubleshoot
Unable to Set Default Printer pop-up error window:

This error is related to the old printer you have set as default before. Printers name that was recorded in your registry are priority on the system which you cannot modify if you're trying to set a new default printer. So you have to manually modify the registry. Note that the registry section is very sensitive,  serious  problems might occur if you modify the registry incorrectly.  Therefore, make sure that you follow these steps carefully.  For insurance included, move down the registry before you alter it. And that point, you can restore the registry if an issue happens. For Additional data about how to go down and restore the registry, click the accompanying article number to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows: (http://support.microsoft.com/kb/322756/)

Now, here's how to troubleshoot:

1. Click the Start button and type "regedit",
then right click and "run as administrator"
2. Now go to this location:

HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Window
3. Located in the right column, you can change the device key v alue data to your printer name.Right click on the Device key then modify the data value (e.g. "HP Laserjet P1006,winspool,Ne03:")
Note: You MIGHT encounter this "Error Editing Value" which you are unable to modify the data,
All you have to do is to set "permissions" to the key, and this is how its done:

Right Click on the "Windows" key and choose "Permissions", check "Allow" -> Apply, then OK.

Thursday, June 19, 2014

How to create a Welcome Message in Windows 2008 Domain

Process to set Welcome Logon message to the Domain User Workstation while they log-in:-
In Domain Server we have to follow these procedures to set this policy:-
1)      Login to the Domain server.
2)      Click on Start  .
3)      Select Administrative Tools.
4)      Select Group Policy Management.
5)      Then Group Policy Management Console will be open.
6)      Select “Domain name” under Domains Category menu.
7)      Select Default Domain Policy (from right side menu box).
8)      Right click on “Default Domain Policy” and click on “edit”.
9)      Then other windows of “Group Policy Management Editor” will be open.
10)  Expand “Policies” tab and select “Windows Settings” tab.
11)  Expand “Windows Settings” tab and select “Security Settings”.
12)  Double click on “Local Policies” option from right side menu list.
13)  Then another window will be open.
14)  Double click on “Security option”.
15)  Then another window will be open.
16)  Search for “Interactive logon: Message text for Users attempting to log-on”.
17)  Right click on “Interactive logon: Message text for Users attempting to log-on” and click on properties.
18)  Then tick the box “Define the policy setting in the template” and then type your message in the given below box and apply & Ok.
19)  Search for “Interactive logon: Message title for Users attempting to log-on”.
20)  Right click on “Interactive logon: Message title for Users attempting to log-on” and click on properties.
21)  Click on “Define this policy setting” box and give Title of your message which you have assigned previously then apply & Ok.
22)  After that whenever the Domain user will be restart his/her workstation then after clicking Ctrl+Alt+Del button, then that message will be displayed on screen.

*************************Enjoy the trick ****************

Saturday, September 14, 2013

Install Windows 7/Vista From USB Drive
Requirements:
*USB Flash Drive (Minimum 4GB)
*Windows 7 or Vista installation files.
Follow the below steps to create bootable Windows 7/Vista USB drive using which you can install Windows 7/Vista easily.
1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe location on your system.
2. Open Command Prompt with admin rights. Use any of the below methods to open Command Prompt with admin rights.
*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.
Or
*Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator.
3. You need to know about the USB drive a little bit. Type in the following commands in the command prompt:
First type DISKPART and hit enter to see the below message.
Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.
4. Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.
So below are the commands you need to type and execute one by one:
SELECT DISK 1
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
(Format process may take few seconds)
ASSIGN
EXIT
Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.
5. Next insert your Windows7/Vista DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to know about it).
6. Maximize the minimized Command Prompt in the 4th step.Type the following command now:
D: CD BOOT and hit enter.Where “D” is your DVD drive letter.
CD BOOT and hit enter to see the below message.
7. Type another command given below to update the USB drive with BOOTMGR compatible code.
BOOTSECT.EXE /NT60 H:
Enjoy!!!!!!